Profiles


p>SC 100 & 150 1″ & 1/12″

This panel with its traditional appearance is offered in a 1″ or 1 1/2″ seam. It is time proven and installs quickly. The 1″ panel is perfect for radius roofs or steep-sloped roofs. It has a low profile. The panel is to be installed on a minimum 3:12 roof pitch and over a solid substrate with a sheet of 30# felt paper acting as the vapor barrier and is to be horizontally applied form eave to ridge. For radius applications, the panel must be installed over a waterproof solid substrate. This panel can be curved down to a 6′ radius or be used in a tapered application. Available in 26ga. 24ga. 22ga. steel; .032 & .040 aluminum

SBC 150 1 1/2″

This traditional bold looking panel profile brings the old world appeal of a board and batten with the modern ease of installation. The panel is to be installed on a minimum 3:12 roof pitch and over a solid substrate with a sheet of 30# felt paper acting as the vapor barrier and is to be horizontally applied from eave to ridge. Available in 26ga. 24ga. 22ga. steel .032 & .040 aluminum

SP 100 & 150 1″ & 1 1/2″

This panel was designed with one thing in mind and that’s quick installation. The SP series is offered in a 1″ or 1 1/2″ high profile. This integral profile is a one directional panel, which means you can only install it in one direction unlike the snap on panels listed above. If you’re installing on a mansard application and would like to install the panel in two directions, please specify our starter panel. The panel is to be installed on a minimum 3:12 roof pitch and over a solid substrate with a sheet of 30# felt paper acting as the vapor barrier and is to be horizontally applied from eave to ridge. Available in 26ga. 24ga. 22ga. steel .032 & .040 aluminum


p>FP100

This module flush panel profile provides an attractive flush appearance. This panel is clipless and incorporates a hidden fastener. The flush panel may be utilized on vertical walls, fascia and soffit. The panel is offered smoothed or with stiffener beads. For soffit conditions this panel can be perforated to vent the eave. The panel can also be ordered as short as 8″ in length. Available in 24ga steel .032 aluminum. Perforations in aluminum only.

SLS 100 & 150

This single locking seam panel utilizes a stable or a floating clip. Any panel over 30′ in length should use the floating clip. All seams are mechanically seamed in the field with a mechanical seamer for maximum weather-tightness. This profile is offered in a 1″ or 1 1/2″ high seam. The panel is to be installed on a minimum 3:12 roof pitch and over a solid substrate with a sheet of 30# felt paper acting as the vapor barrier and is to be horizontally applied from eave to ridge. Available in 26ga. & 24ga. steel, .032 aluminum, 16 oz copper, lead coated copper & TCS.

DLS 100 & 150

This panel offers a double locked seam. This panel also utilizes a stable or floating clip. Any panel over 30′ in length should use the floating clip. All seams are mechanically seamed in the field with a mechanical seamer for maximum weather-tightness. This profile is offered in a 1″ or 1 1/2″ high seam. The panel is to be installed on a minimum 3:12 roof pitch and over a solid substrate with a sheet of 30# felt paper acting as the vapor barrier. Available in 26ga. & 24ga steel, .032 aluminum, 16oz copper, lead coated copper & TCS.

SLS 175

This snap lock seam is the most popular panel used in construction today. This panel offers an architectural look with the performance of a structural panel. The seam height is 1 3/4 high and is offered with a series of clip options to be used in a variety of applications. We offer this panel with optional flat ribs to add additional strength as well as additional architectural appeal. This panel can be applied to a wide variety of substrates, including plywood, insulation and open framing. Available in 24ga. & 22ga. steel .032 & .040 aluminum.

Accessories & Attributes

  • Radius/Curved Barrel Vault Panels
  • Custom Contoured Panels
  • Tapered Panels
  • Continuous Length Panels
  • 10 Profiles
  • In-House Technical Assistance
  • Fabricated Trim To Match
  • Gutters & Downspouts Same Color
  • Galvalume or Galvanized Steel
  • Minimum Quantities Custom Colors
  • 30 Standard Colors
  • Aluminum, Steel, Copper & TCS